Views: 56 Author: Jason Zong Publish Time: 2022-07-22 Origin: Site
A Earth auger is a cutting tool used to remove material to form a hole, and almost always has a circular cross section. earth auger bits are available in different sizes and shapes and can drill different types of holes into many different materials. To make holes, usually a earth auger drill bit is attached to a earth auger , and the drill bit is usually rotated to drive the drill bit to cut the workpiece. The auger drill bit grips the upper end of the drill bit, which is called the shank in the collet.
What knife arrangement does the earth auger have?
What does a earth auger with two rows of blades look like?
What is the utility value of earth augers?
The most common screw design for earth auger has a spiral blade (spiral blade) wound around the lower part of the shaft. The lower edge of the worm blades scrapes off the dirt at the bottom of the hole, and the rest of the blade acts like a worm conveyor, lifting the loose earth to one side. When the hole reaches the desired depth and the tool is pulled out, the screw blade scoops out the remaining loose dirt. The end of the earth auger bit can be a sharp tip protruding below the spiral blades. Its purpose is to push dirt that is under the bar to the side where the blade can pick it up. It also helps to prevent the drill bit from moving sideways and keeping the hole straight. The lower edge of the spiral blades may have teeth.
Another type of earth auger has two vertical blades instead of spiral screws. Instead of scratching the bottom of the hole, this type of drill cuts a cylindrical plug out of the hole, which is held in place by friction between the two blades. The snail must then be pulled out and emptied every foot or so. This type may require less force to operate, but may only be suitable for certain soil types.
Earth augers are widely used in sloping, sandy and hard land for seedlings landscaping projects to plant and dig pits, dig the periphery of large trees, dig holes for fences, dig holes for fertilizing fruit trees, forest trees and cultivators in landscaping projects. Weeding, etc. Grave diameter: 200-600 mm. The earth auger operation is no less than 80 pits per hour. With a daily working time of 8-hours calculated, 640 pits can be dug, which is more than 30x the manual work. Cultivation, weeding, as soon as the width is more than 50 cm, the operation is no less than 800 square meters per hour, the fully automatic operation process is really realized, and the soil drilling frees people from heavy manual labor. Strong performance, beautiful appearance, comfortable operation, low work intensity, suitable for different terrain, high efficiency, easy to transport and field use.
Since 2012, a professional research and development team has been built from basic assembly and market practice. We can design new products according to customer's ideas. We mainly supply earth auger, manual earth auger, ice drill, ice fisher worm drill, artisan mini plough, hand core drill, drill bottom drill and so on.
ADD: No. 6, Yueji Road, Baihuashan Industrial Zone, Wuyi County, Jinhua City, Zhejiang Province